Goodbye Gilroy, The College of Knowledge. . .

In 2 weeks I finish up at Gilroy Catholic College after 6 and a bit years to move on and forward into a new position at Emmaus Catholic College as Director of Innovation. I have moved through all the emotions of excitement, sadness and anticipation since applying, interviewing and accepting the position. I thought the best way to reflect on my Gilroy memories was to blog. . . .

 

Educational blogs are always full of “top lists” – so in no particular order here is my top 7 of G-Roy ! 

 

1. Construction training and uniform

I am proud to say I was the FIRST female in our CEO to be trained in VET Construction in 2009. Over the years VET students have always been proud to work on school projects that better their facilities. My favourite competencies are in the concreting units, this is because of the applied mathematic skills the contrast between this type of outdoors/team work and “regular” classwork. Students pictured are all wearing a Gilroy branded high-vis shirt, this replaced a plain clothes and apron uniform. I started this uniform in 2011, students and VET staff wear it with pride.

2. Charity and community work

I have a personal drive to support charities in a means that takes “participation” so that there is a connectedness to the giving, over the years I have organised crazy hair days, shaved a students hair, dyed my own fluro pink, knitted for months on end and my homeroom since 2009 have sponsored a child in Honduras.

3. 1:1 iPad program and E-Learning role

At the end of 2012 I formally took on the role as Leader of E-Learning. Prior to this role I had always been an informal tech support for staff and a driver for innovative PD which I organised and presented. In the role I have been so humbled by the support and trust from fellow teachers and students, they have been so supportive of change – even when it has been challenging and frustrating. I have seen the iPad and 1:1 device program grow stronger, this is all relational to the positive development staff and student skills.

 

 4. TAS spaces

The TAS workshops and classrooms have gone through many renovations and remodeling since I started. I have taken personal ownership of the spaces I use to make them comfortable and inspiring for staff and students.  Applying Dr Suess vinyl quotes, a secondhand couch, comfy chairs, posters, visuals, accessible resources and even sewing machine covers!

 

5. Friendship and community

Sigh, this is the hardest part of starting a new adventure. . .

6. Love of learning

Inspiring a love of learning in my classes and KLA has been most rewarding, to see students talents grow over the years and their skills improve. I have so many amazing photos of all the proud moments of mess, challenge, completion, smiles, fun, these are just some. . .

7. Edmodo

I first started using Edmodo in 2009, by the end of 2010 it became our preferred LMS. I drove its implementation by sharing its success in my classroom and developing good practice with staff. In education many technologies and tools date quickly like fashion. I have seen fads come and go, Edmodo has been a constant. This frequent or fleeting change can a negative impact on technologies perception in schools. I consider the positive impact Edmodo has had on Gilroy an exceptional mark to leave, I had the sense in 2009 to spot a good thing and the tenacity stick with it – with the team at Edmodo supporting all the way!

 






Advertisements

Design and Technology MDP – 2014

The completion of this years HSC major works were as rewarding for me as ever, the students worked in a variety of design areas – this was challenging from an organisational perspective but allowed students to demonstrate skills that related to their passions, interests and skills.

They had strong design concepts that allowed them to research and develop unique design ideas, this aspect I believe is most important – a pre-formed concept at the start of the project that is shallow in research and innovation/creativity does not allow a student to fulfil the MDP requirements in both the creation of a thorough folio and practical solution.

They did NOT have folio template, we developed a checklist based on marking criteria, changing the order and headings to suit each of the design areas they worked in. This shows evidence of creativity and also application of the design process – NOT heavy instruction, coaching or guidance from a teacher.

 

The projects were:

– Silver and resin jewellery

– Graphics promotional package for Gilroy recycling program

– Bed and storage made from reclaimed timbers

– Guitar

– Sustainably designed family home – model and full plans

– Outdoor daybed with cushions

– Laser cut lace dress with LED lights

– Infographic posters for design students

– Bedroom storage made from pallets

– Grandfather clock made from acrylic

– Parquetry table made from reclaimed building materials

 

Here is a selection of photos from the construction and final stages of the 2014 MDP’s . . . . these photos are not indicative of the ALL the hard work and additional hours these students put it, they were dedicated and perfecting. I hope the amount of experiments they produced is clear – the final products were superb because production processes and ideas were trialled. These projects used resources from other schools, other staff in other faculties, community support, recycled and reclaimed materials, numerous trips to Officeworks for printing and parent help. 



I am so proud of their work, if this is the quality of their work as HSC level students – imagine where they will be in a few years to come. . . . 





















 

 

 

 

With thanks to the IIATE, I have used 3D printers and laser cutters in my classroom

 I LOVE manufacturing technologies, I DREAM about students producing projects using 3D printers, however, I do NOT work at a school that has a 3D printer. We don’t have a CNC machine either? Or a laser cutter? But my students STILL use them as part of their course work.

I am a teacher of technology. I specialise in Design Technology & Industrial Tech – Timber in senior years and in BOTH syllabus documents students need to understand how manufacturing technologies work. In an ideal world they would design and produce projects that would use them, just as they do in industry. Unfortunately, the school I work at doesn’t have ANY appropriate equipment to do that, I only achieve this with an extended network of teachers and the IIATE.

The IIATE is the INSTITUTE of INDUSTRIAL ARTS TECHNOLOGY EDUCATION, they are my professional association, much like English teachers have the ETA. They organise professional development, a yearly conference (this year we are joining forces with other states to create a NATIONAL TECHNOLOGY CONFERENCE!) AND also the loan program for 3D printers. The concept is SOOOO rad that the Technology in Education Magazine recently did a cover story article on it! – – – > http://issuu.com/tempomedia/docs/tie-1-2014

The IIATE council do a fabulous job of providing members/teachers with opportunities to provide for their students, without the 3D printer program my students would not have had access to this experience. Without the networking opportunities the IIATE create my students would not be able to use other schools manufacturing equipment.

The IIATE is a non-profit organisation run by teachers, if you are a TAS teacher NSW you should be a part of the association too! In VIC there is DATTA, and in QLD a similar association called INTAD. Whatever your area of teaching, I urge you to join your supporting professional association.

 

 

 

Your PERSONAL invite to join the TechED Forum

About a year and a half ago I got REALLY frustrated, I am a member of the IIATE, subscriber of ESNET and TEANSW email groups, I use twitter, I blog/read others, I connect with teachers at TeachMeet, I share and always find obliging people who help in return.

BUT I selfishly wanted just ONE place where I could go to and ask subject specific information, I found I would trawl the interweb for hours?? . . . looking for THAT Stage 5 Industrial Tech Timber resource?? As a sweeping generalisation I have found that subject specific TAS resources such as: suppliers? materials? and process tutorials are harder to come by online, so with the help of some friends I created the “TechEd Forum”:

TechED Forum

I am not a computing teacher, and although I am competent in using technology I really stretched my technical expertise in getting this to work, and could NOT have done it without the help of my friend’s Husband Jeremy. The graphics and “logo” was designed by an ex-student now studying graphics, he decided the forum logo should “visually promote communication”, the forum now that it is set up is easy to manage, and doesn’t cost me a cent!

But, what this forum REALLY needs to prosper and run are MORE PARTICIPATING MEMBERS!! 

There are questions in many of the forum topics ASKING for assistance and advice, others OFFERING to share assessments and resources. I know that many of us use Edmodo, Twitter and TeachMeets to resource and crowd share, but the aim for this space was a very different one – to create subject specific discussion areas that can house documents, links, contact details, that could be referred back to categorically and easily. Does this sound useful?

You're invited!

You’re invited!

 

It doesn’t matter if you work in Tasmania, a primary school or TAFE, which sector of education you come from or if you are still studying – you still have something to contribute. The forum is free, it doesn’t cost me a cent to run- and therefore won’t cost you either. I hope that by joining you benefit from the space how it was intended. If you have any ideas for how forum could improve- let me know!

www.techedforum.com.au

Confessions of a fashion addict and Buy Nothing New Month.

 

I have been following the Adbusters anti-consumption activist journey since my early uni-days. Their campaigns and culture jams are witty, productive, creative and informed. I participate in their “Buy Nothing Day” each year – not to have a tokenistic approach to consumption, but to use their campaign and information as a way to read, be an informed consumer and better understand the lifecycle and impact my purchase decisions have on our environment.  I frequently use the Adbusters resources in my Design and Technology classroom, I believe that better consumer choices will be enabled by clever and thoughtful design.

You can read more about Adbusters here: https://www.adbusters.org/campaigns/bnd

 

Two years ago I blogged and participated in the Buy Nothing New month which I am doing again this year. It is an Australian campaign that runs for the month of October: http://www.buynothingnew.com.au/.

 

I am a SELF CONFESSED FASHION ADDICT, I LOVE buying quirky, strange, on-trend clothes. Buy Nothing New month isn’t so much of a challenge as a lot of what I purchase is second hand and re-purposed. My SELF challenge from now on is to not only not buy anything new for October, but look at WHERE my clothes and fashion purchases COME FROM. How they are made? How are they manufactured, processed, dyed? What packaging does it come in? Is it necessary that I purchase it- WHO will its purchase support?

 

. . . a month of reflection that will start a longer journey! YOU can sign up to pledge to BUY NOTHING NEW for a month here: http://www.buynothingnew.com.au/

Using Pinterest in my classroom

http://pinterest.com/

A super bookmarking tool – I use it to collect bookmarks together of videos, links and online resources for units of work – each unit of work has a separate “board” – frequently I share these with students!

There are LOADS of ideas and resources on there already, so it can be as easy as creating your own board, then “re-pinning” other peoples pins from the search bar OR from people you follow.

I use the Pin it to Pinterest tool – this is an add-on to my chrome browser (found here: https://help.pinterest.com/entries/22997343-Add-the-Pin-It-button) – new pins are added without signing into pinterest! – TOO EASY!

pinterest

I RSS feed pins from relevant boards to my Edmodo groups – my DT class get pins from my “innovations and clever design” board, whilst my timber class get “project ideas” – – – see instructions on EDMODO RSS feeds here – – ->  https://blog.edmodo.com/2011/06/01/web-2-0-creating-an-edmodo-rss-feed/

The best bit is that no matter what device you are on, you have access to your bookmarks!!

Yvonne Dixon (a UK teacher) was the FIRST person I started to follow – her boards are FULL of info and a great example of how it works for education: http://pinterest.com/ydixy/

 

OR Julie Boyd’s design and technology/textiles boards – – – > http://pinterest.com/textileshotline/boards/

AND. . . Thank you Jeanette James for initially introducing the idea to me!! 🙂

Who says a TEST OF KNOWLEDGE has to be an EXAM?

 

The Industrial Technology Timber scope and sequence for year 10 set from last year is crap. Yeah, that’s kind of harsh, but the over testing of repetitive outcomes, lack of diversity in tasks (folio, prac, exam, folio, prac, exam **repeat) and the minimal GAP between assessments has been driving me bonkers all year.

I spent AGES re-creating a year 11 Design and Technology assessment – with the focus of “making it real” – this task was so successful that the idea of issuing year 10 Timber students with a hour long test that replicated the content/outcomes in the half yearly was absurd! With the need for modified tasks to be issued, not all students could even access the test?  – – CUE teacher frustration!!

After an awesome chat with our Leader of Pedagogy a few weeks back about HOW I could get the diversity I wanted into a scope and sequence that was already set he said “Who says a TEST OF KNOWLEDGE has to be in the form of an EXAM?” – – – (clever guy our LOP, you should follow him on twitter! @MarkOConnor1976 )

examination_center

 

This is what I knew I wanted in a task:

  • I wanted to make an assessment that was UN-GOOGLABLE
  • An opportunity to apply subject knowledge in a real world contexts
  • Allow for self-driven practical experiences
  • Test plan reading/numeracy – been a real focus of improvement this term
  • Have OPTIONS that would test the same skills/knowledge but allow students to have some CHOICE in the assessment process/format

There are quite a few students in the course that receive modified assessments. Due to the nature of the course and the level of improvement students have demonstrated since year 9, they are gradually doing tasks that resemble a “full” assessment. HOWEVER, if a class test was issued in the format of multiple choice, short response and extended response was to be issued, they would NOT be able to complete it. Whilst writing the task, I kept those students in mind, knowing that many of them would be continuing with the HSC course and building confidence in presenting knowledge is important, more so than “practicing exam techniques”.

I have included the NEW task below, I would love your feedback, thoughts and maybe you could share what you do!

Task Description

task_6_yearly_test_2013

When writing re-writing the scope and sequence for next years year 10 Timber, I will take into the account that SO MUCH THEORETICAL KNOWLEDGE is in the year 9 course, but not so much the year 10. Ideally I would like to RE-WRITE the WHOLE STAGE – balancing this out, but until a new cohort start year 9 I think this task is great. 

Follow up . . . making the syllabus REAL!

In my last blog post, I talked about how I set about re-designing a year 11 Design and Technology task to incorporate REAL and CONTEXTUAL links with design and designers in industry. I did this by changing an old task that traditionally would normally be a report to a NEW TASK that required students to DESIGN, MAKE and SELL jewellery items using mass manufacturing methods, THEN compare their outcome (sales, budgets, success, failures) to that of a REAL DESIGNER.

And then . . . . 

Students were asked to design and create a mass-manufactured jewellery range using Adobe Illustrator to design the product, acrylic as the medium, laser cutter to mass produce. Students had slim to no experience in using the program and the laser cutter machine. Also, we dont have a laser cuter on site AND many students in the class are not particularly interested in jewellery as a focus area. As well as the practical aspect they had to research a designer that “inspired their style”.

SO, how did all these challenges make this project POSSIBLE? and SUCCESSFUL?

  • Students were introduced to the task and received it in a positive way, they liked the brief, and even though it restricted the outcome (in the material and production techniques). By using the Pinterest inspiration page as a starting point they could see that this was a current manufacturing technique that could produce items that would be appealing for a market day held at school. THIS and the fact that the task USED TO BE A REPORT, and now they were designing for a REAL audience and were actually going to SELL their designs for MONEY (for charity) THEY WERE HOOKED!!
  • I explained the process of laser cutting to students and how illustrator could be used to create vector files that could be read/cut by the machine. Students used youtube tutorials that were on the Pinterest page AND peer support to self teach themselves illustrator with minimal assistance from me, this independent learning I am most proud of 🙂
  • A flaw of mine earlier in the project was that we were using various schools laser cutters (and they each used different settings on illustrator), this affected the time management of the project as the solution was not easily fixed. We used THREE DIFFERENT schools equipment (and picked MANY teaching staffs brains!!) in different localities of Sydney. Doing this whilst trying not to impact school time was MOST challenging. Students wrote about this in their evaluation section of the task, noting that production trials should be done as early as possible in the design process to avoid issues, SO even though it did feel frantic during the product stage, they still worked hard with me, and learnt a valuable lesson!
  • Most students had never designed for a real audience, so when they had their designs and were planning their BUDGET SALES PROFIT table to calculate COST of producing the item and how much it should be sold for there were some GREAT discussions in the room to the effect of: “OMG, we could potentially make a few hundred dollars EACH” – “I can’t believe items that are so cheap to make in bulk could make so much profit” – at this moment, I could not keep the happy teacher grin off my face!!
  • The market day itself was challenging to organise in the school calendar, not only because of the logistics of getting the pieces cut, but also making sure the days when the items would be sold was advertised effectively – we had NEVER dont this kind of task before, so students AND teachers had no idea what could be potentially be on offer! Our Assistant Principal suggested running the market over 2 days (one day for browsing, the second day students could be prepared with money to purchase) THIS WAS A SUPER IDEA! We also used the TAS instagram account to preview images of the items so students could have a sneak peek!

 

SO, how did all the challenges make this content REAL? and VALID?

  • The audience of CUSTOMERS during the market day giving real-time feed back was invaluable. At first students thought customers were being kind by buying items, but when sales got over $500 they were confident that their designs were actually WORTH PURCHASE! This type of validation for any designer/artist is the feel good moment of good design.
  • Students worked the entire design process LIKE A DESIGNER: researching the target market using a survey, looking at existing products for pricing/inspiration, working collaboratively as a class group to create diverse items AND working out the cost of production in relation to selling price and end profit.
  • Student enjoyed the practical aspect of the task and even though it was time consuming I still covered syllabus content in my program such as: designing for people, anthropometrics, culture as a factor that affects design, mass-manufacture methods vs couture and bespoke design processes, marketing, designers and their work and innovations in production methodologies.
  • Not all students were as successful in sales as each other, but they ALL SOLD ITEMS! This enabled them to still calculate profit and complete the second part of the task effectively. Like I said earlier, students that were not interested in jewellery design were still excited and motivated about the task due to the profit making, some even decided from this task that this was the area that they should major in for their final year!

Photos from the task: 

 

THANK YOU!

A huge thank you to Bossley Park High School for allowing us to use their laser cutter, The Kings School TAS department for sharing ideas and their laser cutter AND Malyn Mawby from Abottsleigh for donating her valuable WEEKEND to help produce the designs, without the after-hours support of these schools/teachers the students in this class would not have seen their successes! 🙂

My take-aways – YES planning and managing this task for all students to have high quality products was TOUGH, it did require extra work hours, BUT students made this worthwhile by their appreciation and success. . . HOW CAN YOU MAKE YOUR SYLLABUS REAL???

I want to make this syllabus content REAL!?

I always talk about how learning should be relevant, contextual and applicable to students lives. I always demonstrate how syllabus outcomes/content should link to real world stuff- so when students say “WHY are we learning this” there is a legitimate answer, OR, even better, the question isn’t asked- the link is THAT evident.

Tell my then, WHY do I have an assessment task scheduled for Preliminary Design and Technology that looks at design practice, designers and comparisons between their work in industry and what we do in school? WHY does the task ask for a written report that compares and contrasts designing and making when students DON’T get to have that experience? . . . oh jeez, I really can’t hand that task out?? . . . . REALLY?? :-/

Enter the NEW task!!

designers and their work

designers and their work2

So, what’s the difference? THIS task will allow students to DESIGN, MAKE, MAYBE FAIL? MAYBE SUCCEED? They will get to HAVE A GO AT BEING A DESIGNER- designing, making- selling. The premise being that they will NOW have some practice to compare their designer to! 

The hard parts in writing this task:

  • when we design and make we usually create a design folio- there is NO TIME for this process, an assumption has been made that the design process is ESSENTIAL and will be followed- therefore an evaluation could be conducted based on success and failures within each stage of the design process. SO this is how P2.1 will be assessed.
  • we DON’T have a laser cutter on site, I have liaised with another school (bribing teachers with coffees and goodwill) to allow me to produce students designs- this could ONLY be done during weeks 3/4 of term.
  • Students SHOULD be able to determine presentation methods determined by their audience. This is an important skill as designers. Yes report writing skills are important too, but that got scrapped so that students could choose presentation method, SO this is how P5.2 will be assessed.
  • They should be able to compare and evaluate the success of their designs to those of a real designers, BUT, WHAT IF THEIR DESIGNS DON’T SELL on market day?? . . . I have created a BUDGET SALES PROFIT table– so that as long as they set out to achieve a profit, they will still succeed. (NOTE: yes 20 marks is a lot for this section, marking criteria includes use of computer graphics and laser cutting technologies)
  • MATERIALS!!??? . . . I purchased all the findings in bulk from ETSY, and acrylic “scraps” from Australian Plastic Fabricators this kept costs down AND we have a variety of colours in the acrylic. All profits will go to support our World Youth Day travellers from Gilroy.
  • NO TIME FOR RESEARCH??!!! . . . I started a PINTREST board for students with bookmarks and links of relevant designers, illustrator tutorials, laser cutter videos/info. This should get them started! (and limit the time spent on this section so they can get to the good stuff quicker)
  • The need to UNDERSTAND design is important. There is still a section that analyses and evaluates a designers work, hopefully this wont be presented in a report format (as it doesn’t need to be) AND hopefully the experiences they gain in the practical side of the project enable this section to be much more rewarding than just reading a bio on the internet.

This task has taken HOURS of planning, research and co-ordination, but, HOW could I say I was making learning contextual and relevant from WITHIN a classroom? By handing out a research report???

Assessment tasks can be evil. This task, to me NOW seems real, with learning and skill development in mind. I hope this task allows students to PLAY the part of a designer, so they can better understand their role, what they do and the technologies and processes they use. This class is such a CREATIVE group, I couldn’t have possibly imagined stifling them with a “report”. I can’t wait to see what they come up with, what they will make and sell, and HOW this will inspire them to form a career pathway in design.

Bulk purchased findings

Reinvigorating the old? Nah, change is WAY better!!

We all have those topics/units that run year to year and dont change. We feel comfortable in teaching them- we are experts in their content. But seriously, after teaching year 8 “satin boxer-shorts” for the hundredth time, the thought of another elastic casing almost made me wanna vomit. AS a staff we discussed ways to adapt and modify the unit . . . but, in the end the WHOLE LOT got a re-write! 

So, the NEW design situation and brief reads:

Design Situation-

You are a designer working for an accessory company and have been asked to design a new range of tech-bags that hold and protect a range of technological devices and hardware.

Design Brief-

Design and produce a laptop bag that employs natural textile materials including plant

and animal fibres in its construction and decoration that could be included in this range.  

IMG_3990

Programming this unit has been an enjoyable collaborative process with staff in the English faculty teaching TAS staff hand felting processes and experienced textiles teachers showing me BETTER ways of finishing the project and sharing resources.

The unit runs under the ANIMAL PRODUCTION context area, and uses TEXTILES TECHNOLOGIES to produce a laptop sleeve. The unit has a digital “TEXT” that will eventually run through itunesU when ipads flow through next year.

I have attached the PROGRAM, BOOKLET, TEXT and ASSESSMENT . . . would love your feedback or any other resources that you think could be added!!

FIBRESMAKEFABRIC_BOOK

FIBRESMAKEFABRIC_PROG_2013

FIBRESMAKEFABRIC_TEXT

FELTING_ASSESSMENT

LAPTOP SLEEVE PATTERN APPROPRIATED FROM:

http://thecottagehome.blogspot.com.au/2010/10/laptop-kindle-i-pad-sleeve-tutorial.html